It is used for uniform extrusion in the laboratory to remove excess water from the fabric, completely simulating the process of rolling and dyeing on site. 【Relevant Standards】

Not at the moment

[Scope of application】：It is used for uniform extrusion in the laboratory to remove excess water from the fabric, completely simulating the process of rolling and dyeing on site. [Instrument features]: 　　   1. Push the cylinder with compressed air. The pressure is balanced, and the pressure is reproducible after a long period of use. 2. The roller uses a hardness of 72 degrees, and the pressure suction rate is between 45%~90% and has a wide range of applications. 3. The small rolling mill motor is equipped with forward and reverse rotation function, and the rotation control can be controlled interchangeably by manual or foot movement, and the special device has high efficiency. 4. Manufactured from high-quality 304 stainless steel, it has a beautiful appearance and is durable. 【Technical Parameters】:           1. The pressure suction roller is made of imported materials, covered with N, B, R, and rubber and then precisely ground, with a hardness of 72 degrees Shore. 2. The diameter of the rubber roller is 130mm, and the length is 430mm; 3. Motor: Three-phase motor rotates, and the speed is adjustable; 4. Pressure range: 0~7kg; independent adjustment of left and right pressure, 5. Speed: 0~10m/min frequency conversion speed regulation; 6. Power source: AC380V 50HZ; 7. Power: 150W; 8. Overall dimensions: vertical 920×620×1240mm; horizontal 920×620×1080mm; 9. Net weight: 105kg.